April 1, 2009
This new 17-station TDCF/T-25 flange roll former with clip-maker option is the latest from Standard Sheet Metal Machinery. The freestanding T-35 duct-flange roll former has the clip rolls on the reverse side with slit-to-width and cut-to-length options. Clips are slit and cut from material in sheets. A nine-station, coil-fed clip maker system is also available.
Standard Sheet Metal Machinery Inc., P.O. Box 2673, Cedar Rapids, IA 52406; (319) 363-2535; www.ductmachines.com.