July 1, 2009
CS Unitec’s new Rolei BE-5 deburring machine can achieve double-sided deburring of metal sheets up to 0.2 inches thick in a single pass with no additional treatment, according to company officials. The machine has two speeds, which enables fine deburring at 600 rpm or standard deburring at 1,200 rpm. Optional guide rail extensions can be used to deburr large, thin sheets. Two abrasive flap wheels rotate in opposite directions to grind both sides of the metal as it passes through. This deburrs both edges simultaneously. The flap wheels can be easily adjusted as they wear. One set of wheels lasts for approximately 6,500 feet of stainless steel sheet. The Rolei BE-5 is supplied standard with two 80-grit flap wheels and can be used with optional grits to suit the facet width and materials for a particular application.
CS Unitec Inc., 22 Harbor Avenue, Norwalk, CT 06850; (800) 700-5919; fax (203) 853-9921; www.csunitec.com.