December 3, 2004
Power Fasteners has expanded its power-actuated line with a new general-purpose hammer-driven tool. The Powers P1000 hammer-driven tool is designed with less recoil, according to the company. The load is set by a single hammer blow on the back end of the tool, and sets the pin flush. The product uses .22-caliber loads ranging from gray to yellow, and can set .300 head or 8mm head drives pints up to 3 inches in length.
Power Fasteners Inc., 2 Powers Square, New Rochelle, NY 10801; (914) 235-6300; www.powers.com.